82799-8  Spatial clot growth analysis panel - Platelet poor plasmaSpatial clot growth analysis panel - Platelet poor plasmaSpatial clot growth analysis panel: -: Pt: PPP: -: Coag  

PANEL HIERARCHY  (view this panel in the LForms viewer)

  LOINC#   LOINC Name R/O/C  Cardinality  Ex. UCUM Units 
  82799-8   Spatial clot growth analysis panel - Platelet poor plasmaSpatial clot growth analysis panel - Platelet poor plasmaSpatial clot growth analysis panel: -: Pt: PPP: -: Coag    
       82798-0   Clot formation lag time in Platelet poor plasmaClot formation lag time in Platelet poor plasmaClot formation lag time: Time: Pt: PPP: Qn: Coag   min 
       82797-2   Initial clot growth [Velocity] in Platelet poor plasmaInitial clot growth [Velocity] in Platelet poor plasmaClot growth.initial: Vel: Pt: PPP: Qn: Coag   U/s 
       82796-4   Stationary clot growth mean [Velocity] Platelet poor plasmaStationary clot growth mean [Velocity] Platelet poor plasmaClot growth.stationary: Vel: Stdy^mean: PPP: Qn: Coag   U/s 
       82795-6   Clot growth mean [Velocity] Platelet poor plasmaClot growth mean [Velocity] Platelet poor plasmaClot growth: Vel: Stdy^mean: PPP: Qn: Coag   um/s 
       82794-9   Spontaneous clot formation [Time] in Platelet poor plasmaSpontaneous clot formation [Time] in Platelet poor plasmaClot formation.spontaneous: Time: Pt: PPP: Qn: Coag   min 
       82793-1   Clot size [Length] in Platelet poor plasma --30 minutes post incubationClot size [Length] in Platelet poor plasma --30 minutes post incubationClot size^30M post incubation: Len: Pt: PPP: Qn: Coag   um 
       82792-3   Clot density in Platelet poor plasmaClot density in Platelet poor plasmaClot density: OD: Pt: PPP: Qn: Coag   [arb'U] 
 

NAME
  Fully-Specified Name: 
Component   Property   Time   System   Scale   Method
Spatial clot growth analysis panel  Pt  PPP  Coag
  Long Common Name:  Spatial clot growth analysis panel - Platelet poor plasma
  Shortname:  Spatial clot growth Pnl PPP

TERM DEFINITION/DESCRIPTION(S)
  The spatial clot growth analysis panel is used to report the results of clot formation and growth over time. Such results include the time to clot formation, density, velocity of clot formation, and time to spontaneous clot formation. This panel was created for, but is not limited in use to, the Submitter's Hemacore Thrombodynamics analyser, which uses time-lapse microscopy to take images of clot formation after plasma is placed in contact with immobilized tissue factor (TF). Parameters include those regarding clot formation at the point of contact between the plasma sample and the TF as well as spontaneous clot formation in the portion of the plasma sample that has not been in direct contact with TF. The recommended specimen for the Hemacore Thrombodynamics analyser is platelet free plasma, defined as <1000 platelets/uL.
 
 

BASIC ATTRIBUTES
  Class/Type: PANEL.COAG/Lab
  Panel Type: Panel
  First Released in Version: 2.58
  Last Updated in Version: 2.58
  Order vs. Obs.: Order
  Status: Active

PARTS

Part Type    Part No.  Part Name   
Component   LP222227-3  Spatial clot growth analysis panel 
Property   LP6769-6 
Time   LP6960-1  Pt   [Point in time (spot)] 
System   LP7494-0  PPP   [Platelet poor plasma] 
Scale   LP7747-1 
Method   LP6186-3  Coag   [Coagulation assay] 
Fragments for synonyms   LP21059-8  Panel 

RELATED NAMES
  Clot PANEL.COAGULATION Point in time
  Clottable Panl Random
  COAGULATION Plas Spatial clot growth Pnl
  Coagulation assay Platelet poor plasma Tilt tube
  Pan Pnl  

CHANGE HISTORY
  Change Type: ADD

INTERNAL FIELDS
  Long Common Name: Spatial clot growth analysis panel - Platelet poor plasma
  Shortname: Spatial clot growth Pnl PPP
  Fully Specified Name: Spatial clot growth analysis panel: -: Pt: PPP: -: Coag
     
  Component Word Count: 0
  ID: 87176
  # of Panel Elements: 8
  Status (Raw): ACTIVE



Selected information about each LOINC that is part of this panel



82798-0   Clot formation lag time in Platelet poor plasmaClot formation lag time in Platelet poor plasmaClot formation lag time: Time: Pt: PPP: Qn: Coag  

NAME
  Fully-Specified Name: 
Component   Property   Time   System   Scale   Method
Clot formation lag time  Time  Pt  PPP  Qn  Coag
  Long Common Name:  Clot formation lag time in Platelet poor plasma
  Shortname:  Clot form lag PPP

TERM DEFINITION/DESCRIPTION(S)
  See Attached files.
 
 

PART DEFINITION/DESCRIPTION(S)
  Part: Clot formation lag time
  The clot formation lag time is the time from the beginning of the measurement until the beginning of clot growth. When calculated using time-lapse microscopy (i.e., thrombodynamics or spatiotemporal clot analysis), the lag time is measured from when the activator first contacts the plasma sample until the beginning of the clot growth, which is defined as the point when the light scatter from the growing fibrin clot reaches half of the maximum light scatter from the formed clot at the end of the measurement.
 
 

BASIC ATTRIBUTES
  Class/Type: COAG/Lab
  First Released in Version: 2.58
  Last Updated in Version: 2.58
  Order vs. Obs.: Observation
  Status: Active

MEMBER OF THESE PANELS
  82799-8   Spatial clot growth analysis panel - Platelet poor plasmaSpatial clot growth analysis panel - Platelet poor plasmaSpatial clot growth analysis panel: -: Pt: PPP: -: Coag

PARTS

Part Type    Part No.  Part Name   
Component   LP222226-5  Clot formation lag time 
Property   LP6879-3  Time   [Time (e.g. seconds)] 
Time   LP6960-1  Pt   [Point in time (spot)] 
System   LP7494-0  PPP   [Platelet poor plasma] 
Scale   LP7753-9  Qn 
Method   LP6186-3  Coag   [Coagulation assay] 

RELATED NAMES
  CFT Kinetics Quan
  Clot k-time Quant
  Clot form lag Plas Quantitative
  Clottable Platelet poor plasma Random
  COAGULATION Point in time Tilt tube
  Coagulation assay QNT  

EXAMPLE UNITS
  Unit  Source Type
  min  EXAMPLE UCUM UNITS 

UNITS (INTERNAL DETAILS)
  Source Type:  EXAMPLE UCUM UNITS 
  Unit:  min 

UNITS AND RANGE
  Range  Units Type
  Each laboratory should determine its own reference ranges using samples from healthy persons that are typical for local population. Reference range for illustrative purposes: 0.6 – 1.5 min.   

CHANGE HISTORY
  Change Type: ADD

INTERNAL FIELDS
  Long Common Name: Clot formation lag time in Platelet poor plasma
  Shortname: Clot form lag PPP
  Fully Specified Name: Clot formation lag time: Time: Pt: PPP: Qn: Coag
     
  Component Word Count: 0
  ID: 87175
  Status (Raw): ACTIVE


82797-2   Initial clot growth [Velocity] in Platelet poor plasmaInitial clot growth [Velocity] in Platelet poor plasmaClot growth.initial: Vel: Pt: PPP: Qn: Coag  

NAME
  Fully-Specified Name: 
Component   Property   Time   System   Scale   Method
Clot growth.initial  Vel  Pt  PPP  Qn  Coag
  Long Common Name:  Initial clot growth [Velocity] in Platelet poor plasma
  Shortname:  Clot growth.init PPP Qn

TERM DEFINITION/DESCRIPTION(S)
  See Attached files.
 
 

PART DEFINITION/DESCRIPTION(S)
  Part: Clot growth.initial
  Clot growth is expressed as an increase in length over time and is related to the propagation stage of blood coagulation. When calculated using time-lapse microscopy (i.e., thrombodynamics or spatiotemporal clot analysis), if there is no spontaneous clotting, the growth velocity is calculated as the average growth velocity between 15-25 minutes after the beginning of clot growth and is called the stationary growth velocity. If spontaneous clotting is present, then clot growth (called initial clot growth) is calculated based on growth during the 5-minute interval preceding the appearance of spontaneous clots.
 
 

BASIC ATTRIBUTES
  Class/Type: COAG/Lab
  First Released in Version: 2.58
  Last Updated in Version: 2.58
  Order vs. Obs.: Observation
  Status: Active

MEMBER OF THESE PANELS
  82799-8   Spatial clot growth analysis panel - Platelet poor plasmaSpatial clot growth analysis panel - Platelet poor plasmaSpatial clot growth analysis panel: -: Pt: PPP: -: Coag

PARTS

Part Type    Part No.  Part Name   
Component   LP222225-7  Clot growth.initial   [Initial clot growth] 
Property   LP6888-4  Vel   [Velocity (distance/time)] 
Time   LP6960-1  Pt   [Point in time (spot)] 
System   LP7494-0  PPP   [Platelet poor plasma] 
Scale   LP7753-9  Qn 
Method   LP6186-3  Coag   [Coagulation assay] 

RELATED NAMES
  Clot Platelet poor plasma Quantitative
  Clottable Point in time Random
  COAGULATION QNT Tilt tube
  Coagulation assay Quan Velocity
  Plas Quant  

EXAMPLE UNITS
  Unit  Source Type
  U/s  EXAMPLE UCUM UNITS 

UNITS (INTERNAL DETAILS)
  Source Type:  EXAMPLE UCUM UNITS 
  Unit:  U/s 

UNITS AND RANGE
  Range  Units Type
  Each laboratory should determine its own reference ranges using samples from healthy persons that are typical for local population. Reference range for illustrative purposes: 38.0 – 56.0 μm/min.   

CHANGE HISTORY
  Change Type: ADD

INTERNAL FIELDS
  Long Common Name: Initial clot growth [Velocity] in Platelet poor plasma
  Shortname: Clot growth.init PPP Qn
  Fully Specified Name: Clot growth.initial: Vel: Pt: PPP: Qn: Coag
     
  Component Word Count: 0
  ID: 87174
  Status (Raw): ACTIVE


82796-4   Stationary clot growth mean [Velocity] Platelet poor plasmaStationary clot growth mean [Velocity] Platelet poor plasmaClot growth.stationary: Vel: Stdy^mean: PPP: Qn: Coag  

NAME
  Fully-Specified Name: 
Component   Property   Time   System   Scale   Method
Clot growth.stationary  Vel  Stdy^mean  PPP  Qn  Coag
  Long Common Name:  Stationary clot growth mean [Velocity] Platelet poor plasma
  Shortname:  Clot growth.stat Mean PPP Qn

TERM DEFINITION/DESCRIPTION(S)
  See Attached files.
 
 

PART DEFINITION/DESCRIPTION(S)
  Part: Clot growth.stationary
  Clot growth is expressed as an increase in length over time and is related to the propagation stage of blood coagulation. When calculated using time-lapse microscopy (i.e., thrombodynamics or spatiotemporal clot analysis), if there is no spontaneous clotting, the growth velocity is calculated as the average growth velocity between 15-25 minutes after the beginning of clot growth and is called the stationary growth velocity. If spontaneous clotting is present, then clot growth (called initial clot growth) is calculated based on growth during the 5-minute interval preceding the appearance of spontaneous clots.
 
 

BASIC ATTRIBUTES
  Class/Type: COAG/Lab
  First Released in Version: 2.58
  Last Updated in Version: 2.58
  Order vs. Obs.: Observation
  Status: Active

MEMBER OF THESE PANELS
  82799-8   Spatial clot growth analysis panel - Platelet poor plasmaSpatial clot growth analysis panel - Platelet poor plasmaSpatial clot growth analysis panel: -: Pt: PPP: -: Coag

PARTS

Part Type    Part No.  Part Name   
Component   LP222223-2  Clot growth.stationary   [Stationary clot growth] 
Property   LP6888-4  Vel   [Velocity (distance/time)] 
Time   LP6967-6  Stdy   [Study] 
     Time Modifier   LP6971-8  mean 
System   LP7494-0  PPP   [Platelet poor plasma] 
Scale   LP7753-9  Qn 
Method   LP6186-3  Coag   [Coagulation assay] 
Fragments for synonyms   LP91300-1  mean 
Multipart   LP91412-4  Vel Mean 

RELATED NAMES
  Average Platelet poor plasma Sutdies
  Avg QNT Tilt tube
  Clot Quan V mean
  Clottable Quant Velocity
  COAGULATION Quantitative Vmean
  Coagulation assay Studies  
  Plas Study  

EXAMPLE UNITS
  Unit  Source Type
  U/s  EXAMPLE UCUM UNITS 

UNITS (INTERNAL DETAILS)
  Source Type:  EXAMPLE UCUM UNITS 
  Unit:  U/s 

UNITS AND RANGE
  Range  Units Type
  Each laboratory should determine its own reference ranges using samples from healthy persons that are typical for local population. Reference range for illustrative purposes: 20.0 – 29.0 μm/min.   

CHANGE HISTORY
  Change Type: ADD

INTERNAL FIELDS
  Long Common Name: Stationary clot growth mean [Velocity] Platelet poor plasma
  Shortname: Clot growth.stat Mean PPP Qn
  Fully Specified Name: Clot growth.stationary: Vel: Stdy^mean: PPP: Qn: Coag
     
  Component Word Count: 0
  ID: 87173
  Status (Raw): ACTIVE


82795-6   Clot growth mean [Velocity] Platelet poor plasmaClot growth mean [Velocity] Platelet poor plasmaClot growth: Vel: Stdy^mean: PPP: Qn: Coag  

NAME
  Fully-Specified Name: 
Component   Property   Time   System   Scale   Method
Clot growth  Vel  Stdy^mean  PPP  Qn  Coag
  Long Common Name:  Clot growth mean [Velocity] Platelet poor plasma
  Shortname:  Clot growth Mean PPP Qn

TERM DEFINITION/DESCRIPTION(S)
  See Attached files.
 
 

PART DEFINITION/DESCRIPTION(S)
  Part: Clot growth
  Clot growth is expressed as an increase in length over time and is related to the propagation stage of blood coagulation. When calculated using time-lapse microscopy (i.e., thrombodynamics or spatiotemporal clot analysis), if there is no spontaneous clotting, the growth velocity is calculated as the average growth velocity between 15-25 minutes after the beginning of clot growth and is called the stationary growth velocity. If spontaneous clotting is present, then clot growth (called initial clot growth) is calculated based on growth during the 5-minute interval preceding the appearance of spontaneous clots.
 
 

BASIC ATTRIBUTES
  Class/Type: COAG/Lab
  First Released in Version: 2.58
  Last Updated in Version: 2.58
  Order vs. Obs.: Observation
  Status: Active

MEMBER OF THESE PANELS
  82799-8   Spatial clot growth analysis panel - Platelet poor plasmaSpatial clot growth analysis panel - Platelet poor plasmaSpatial clot growth analysis panel: -: Pt: PPP: -: Coag

PARTS

Part Type    Part No.  Part Name   
Component   LP222224-0  Clot growth 
Property   LP6888-4  Vel   [Velocity (distance/time)] 
Time   LP6967-6  Stdy   [Study] 
     Time Modifier   LP6971-8  mean 
System   LP7494-0  PPP   [Platelet poor plasma] 
Scale   LP7753-9  Qn 
Method   LP6186-3  Coag   [Coagulation assay] 
Fragments for synonyms   LP91300-1  mean 
Multipart   LP91412-4  Vel Mean 

RELATED NAMES
  Average Platelet poor plasma Sutdies
  Avg QNT Tilt tube
  Clot Quan V mean
  Clottable Quant Velocity
  COAGULATION Quantitative Vmean
  Coagulation assay Studies  
  Plas Study  

EXAMPLE UNITS
  Unit  Source Type
  um/s  EXAMPLE UCUM UNITS 

UNITS (INTERNAL DETAILS)
  Source Type:  EXAMPLE UCUM UNITS 
  Unit:  um/s 

UNITS AND RANGE
  Range  Units Type
  Each laboratory should determine its own reference ranges using samples from healthy persons that are typical for local population. Reference range for illustrative purposes: 20.0 – 29.0 μm/min.   

CHANGE HISTORY
  Change Type: ADD

INTERNAL FIELDS
  Long Common Name: Clot growth mean [Velocity] Platelet poor plasma
  Shortname: Clot growth Mean PPP Qn
  Fully Specified Name: Clot growth: Vel: Stdy^mean: PPP: Qn: Coag
     
  Component Word Count: 0
  ID: 87172
  Status (Raw): ACTIVE


82794-9   Spontaneous clot formation [Time] in Platelet poor plasmaSpontaneous clot formation [Time] in Platelet poor plasmaClot formation.spontaneous: Time: Pt: PPP: Qn: Coag  

NAME
  Fully-Specified Name: 
Component   Property   Time   System   Scale   Method
Clot formation.spontaneous  Time  Pt  PPP  Qn  Coag
  Long Common Name:  Spontaneous clot formation [Time] in Platelet poor plasma
  Shortname:  CFT.spont PPP

TERM DEFINITION/DESCRIPTION(S)
  See Attached files.
 
 

PART DEFINITION/DESCRIPTION(S)
  Part: Clot formation.spontaneous
  The spontaneous clot formation time (Tsp) is the time from the beginning of the assay to time at which the average area of spontaneous clots comprises at least five percent of the overall sample area. This clotting parameter characterizes clotting that is independent of the activator surface; under normal conditions, no spontaneous clotting is observed.
 
 

BASIC ATTRIBUTES
  Class/Type: COAG/Lab
  First Released in Version: 2.58
  Last Updated in Version: 2.58
  Order vs. Obs.: Observation
  Status: Active

MEMBER OF THESE PANELS
  82799-8   Spatial clot growth analysis panel - Platelet poor plasmaSpatial clot growth analysis panel - Platelet poor plasmaSpatial clot growth analysis panel: -: Pt: PPP: -: Coag

PARTS

Part Type    Part No.  Part Name   
Component   LP222222-4  Clot formation.spontaneous   [Spontaneous clot formation] 
Property   LP6879-3  Time   [Time (e.g. seconds)] 
Time   LP6960-1  Pt   [Point in time (spot)] 
System   LP7494-0  PPP   [Platelet poor plasma] 
Scale   LP7753-9  Qn 
Method   LP6186-3  Coag   [Coagulation assay] 

RELATED NAMES
  CFT Kinetics Quan
  CFT.spont k-time Quant
  Clot Plas Quantitative
  Clottable Platelet poor plasma Random
  COAGULATION Point in time Tilt tube
  Coagulation assay QNT  

EXAMPLE UNITS
  Unit  Source Type
  min  EXAMPLE UCUM UNITS 

UNITS (INTERNAL DETAILS)
  Source Type:  EXAMPLE UCUM UNITS 
  Unit:  min 

UNITS AND RANGE
  Range  Units Type
  Each laboratory should determine its own reference ranges using samples from healthy persons that are typical for local population. Reference range for illustrative purposes: >30 min (no detected normally).   

CHANGE HISTORY
  Change Type: ADD

INTERNAL FIELDS
  Long Common Name: Spontaneous clot formation [Time] in Platelet poor plasma
  Shortname: CFT.spont PPP
  Fully Specified Name: Clot formation.spontaneous: Time: Pt: PPP: Qn: Coag
     
  Component Word Count: 0
  ID: 87171
  Status (Raw): ACTIVE


82793-1   Clot size [Length] in Platelet poor plasma --30 minutes post incubationClot size [Length] in Platelet poor plasma --30 minutes post incubationClot size^30M post incubation: Len: Pt: PPP: Qn: Coag  

NAME
  Fully-Specified Name: 
Component   Property   Time   System   Scale   Method
Clot size^30M post incubation  Len  Pt  PPP  Qn  Coag
  Long Common Name:  Clot size [Length] in Platelet poor plasma --30 minutes post incubation
  Shortname:  Clot size 30M p Inc PPP

TERM DEFINITION/DESCRIPTION(S)
  See Attached files.
 
 

PART DEFINITION/DESCRIPTION(S)
  Part: Clot size
  Clot size is measured in terms of the length of a fibrin clot.
 
 

BASIC ATTRIBUTES
  Class/Type: COAG/Lab
  First Released in Version: 2.58
  Last Updated in Version: 2.58
  Order vs. Obs.: Observation
  Status: Active

MEMBER OF THESE PANELS
  82799-8   Spatial clot growth analysis panel - Platelet poor plasmaSpatial clot growth analysis panel - Platelet poor plasmaSpatial clot growth analysis panel: -: Pt: PPP: -: Coag

PARTS

Part Type    Part No.  Part Name   
Component   LP222221-6  Clot size 
     Challenge   LP31604-9  30M post incubation   [30 minutes post incubation] 
Property   LP6822-3  Len   [Length] 
Time   LP6960-1  Pt   [Point in time (spot)] 
System   LP7494-0  PPP   [Platelet poor plasma] 
Scale   LP7753-9  Qn 
Method   LP6186-3  Coag   [Coagulation assay] 
Fragments for synonyms   LP20512-7  Post 

RELATED NAMES
  30M p Inc Length Quan
  After Plas Quant
  Clot Platelet poor plasma Quantitative
  Clottable Point in time Random
  COAGULATION PST Tilt tube
  Coagulation assay QNT  

EXAMPLE UNITS
  Unit  Source Type
  um  EXAMPLE UCUM UNITS 

UNITS (INTERNAL DETAILS)
  Source Type:  EXAMPLE UCUM UNITS 
  Unit:  um 

UNITS AND RANGE
  Range  Units Type
  Each laboratory should determine its own reference ranges using samples from healthy persons that are typical for local population. Reference range for illustrative purposes: 800 – 1200 μm.   

CHANGE HISTORY
  Change Type: ADD

INTERNAL FIELDS
  Long Common Name: Clot size [Length] in Platelet poor plasma --30 minutes post incubation
  Shortname: Clot size 30M p Inc PPP
  Fully Specified Name: Clot size^30M post incubation: Len: Pt: PPP: Qn: Coag
     
  Component Word Count: 0
  ID: 87170
  Status (Raw): ACTIVE


82792-3   Clot density in Platelet poor plasmaClot density in Platelet poor plasmaClot density: OD: Pt: PPP: Qn: Coag  

NAME
  Fully-Specified Name: 
Component   Property   Time   System   Scale   Method
Clot density  OD  Pt  PPP  Qn  Coag
  Long Common Name:  Clot density in Platelet poor plasma
  Shortname:  Clot D PPP

TERM DEFINITION/DESCRIPTION(S)
  See Attached files.
 
 

PART DEFINITION/DESCRIPTION(S)
  Part: Clot density
  The clot density is a measure of the firmness and structure of a fibrin clot. It reflects the quantity and biological activity of fibrinogen but is not a direct measurement of fibrin concentration.
 
 

BASIC ATTRIBUTES
  Class/Type: COAG/Lab
  First Released in Version: 2.58
  Last Updated in Version: 2.58
  Order vs. Obs.: Observation
  Status: Active

MEMBER OF THESE PANELS
  82799-8   Spatial clot growth analysis panel - Platelet poor plasmaSpatial clot growth analysis panel - Platelet poor plasmaSpatial clot growth analysis panel: -: Pt: PPP: -: Coag

PARTS

Part Type    Part No.  Part Name   
Component   LP222220-8  Clot density 
Property   LP6842-1  OD   [Optical density] 
Time   LP6960-1  Pt   [Point in time (spot)] 
System   LP7494-0  PPP   [Platelet poor plasma] 
Scale   LP7753-9  Qn 
Method   LP6186-3  Coag   [Coagulation assay] 
Fragments for synonyms   LP21002-8  Density 

RELATED NAMES
  Clot Plas Quantitative
  Clottable Platelet poor plasma Random
  COAGULATION Point in time Tilt tube
  Coagulation assay QNT  
  Den Quan  
  Optical density Quant  

EXAMPLE UNITS
  Unit  Source Type
  [arb'U]  EXAMPLE UCUM UNITS 

UNITS (INTERNAL DETAILS)
  Source Type:  EXAMPLE UCUM UNITS 
  Unit:  [arb'U] 

UNITS AND RANGE
  Range  Units Type
  Each laboratory should determine its own reference ranges using samples from healthy persons that are typical for local population. Reference range for illustrative purposes: 15000 – 32000 a.u.   

CHANGE HISTORY
  Change Type: ADD

INTERNAL FIELDS
  Long Common Name: Clot density in Platelet poor plasma
  Shortname: Clot D PPP
  Fully Specified Name: Clot density: OD: Pt: PPP: Qn: Coag
     
  Component Word Count: 0
  ID: 87169
  Status (Raw): ACTIVE